Supermicro SSE-X24S User Manual download pdf (Page 52)

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches

4-6

The Layer 2/3 1/10-Gigabit Ethernet switches contain two bays in the rear that each

house a 2-port 10-Gigabit interface module containing either CX-4, XFP or SFP+ ports,

depending upon your chosen configuration (see Figure 4-5). Bay 1 can be used for

Stacking or 10-Gb/s uplink. Bay 2 can also be used for stacking, but it normally is used

to house a module for links to one or two external 10-Gb/s switches.

Current modules available are:

• AOM-SSE-X2C module with two CX4 copper interface ports for connections up to

12 meters in distance.

• AOM-SSE-X2F module with two XFP interface ports for accepting XFP transceivers

allowing fiber connections up to 300 meters in distance.

• AOM-SSE-X2S module with two SFP+ interface ports for accepting SFP+ copper

cables or SFP+ transceivers allowing fiber connections up to 300 meters in

distance.

Serial Ports

One serial port is available for communications to an external control console.

Power Port

This port is for connecting the power cable for powering the Layer 2/3 1/10-Gigabit

Ethernet switches.

4-6 Indicators

This section covers LED indicators for the Layer 2/3 1/10-Gigabit Ethernet switches.

These LEDs are listed and described in Table 4-5.

NOTE: You must use a Supermicro CX4 cable if you are using one or more of

these ports for stacking. You may use the Supermicro CBL-0474L for 1M

connections or the CBL-0389L-01 for 3M connections.

Table 4-5. SSE-G24-TG4 and SSE-G48-TG4 LED Indicators

LED Name Description

Master

Indicates this is the master switch in a stacked

configuration.

Fan Indicates fan status.

Thermal Indicates Thermal status.

Diagnostic Indicates diagnostic activity.

Power Indicates power for the system.

Combo LEDs

a. 21-24 for SSE-G24-TG4 and 45-48 for the SSE-G48-TG4

Indicates activity for the Combo fiber port that

corresponds to the number indicated.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 305 306

No comments

Supermicro SSE-X24S User Manual Page 52