Supermicro SSE-X24S User Manual download pdf (Page 299)

100

101

A-5

Appendix A: Rack Installation

Separating the Rails

1. Separate the inner rail from the outer rail by depressing the black plastic flange

inside the inner rail. This will release the outer rail.

2. Silde the inner rail forward and out of the outer rail.

3. The CSE-PT52L rail kit also includes a set of inner rail extensions. Only the inner

rails are required and you may discard the inner rail extensions.

Installing the Inner Rails

Use the procedure below and Figure A-2 to install the inner rails.

Installing the Inner Rails on the Switch

1. Place one of the inner rails on one side of the switch aligning the hook on the side of

the switch with the mounting hole in the rail. Make sure the inner rail faces outward,

as illustrated below.

2. Slide the inner rail forward so that the rail fits securely into the hook on the side of

the switch.

3. Secure the inner rail to the switch with one screw as illustrated below.

4. Repeat steps 1-2 for the remaining inner rail.

Figure A-2. Installing the Inner Rail

1 2 ... 294 295 296 297 298 299 300 301 302 303 304 305 306

Comments to this Manuals

No comments

Supermicro SSE-X24S User Manual Page 299

Comments to this Manuals

Related products and manuals for Network switches Supermicro SSE-X24S