1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-176
Component
Clicking the COMPONENT tab brings up the PIM COMPONENT CONFIGURATION page
(Figure 5-155). The parameters for this page are shown in Table 5-126.
Registration Stop
Rate Limiting Period
This parameter specifies the registration stop rate limiting period in seconds.
PMBR Status This parameter allows you to enable or disable the PMBR status in the switch.
Static RP This parameter allows you to enable or disable the Static RP in the switch.
Figure 5-155. PIM Component Configuration Page
Table 5-126. PIM Component Configuration Page Parameters
Parameter Description
Component ID This parameter specifies a number uniquely identifying the component.
Candidate CRP Hold
Time
This parameter specifies the hold time of the component when it is a candidate
RP in the local domain.
Mode This parameter specifies the mode of the component. It can be Sparse or Dense.
BSR Address
This parameter specifies the IP address of the bootstrap router for the local PIM
region, which is a read-only field.
BSR Expiry Time
This parameter indicates the minimum time remaining before the bootstrap
router in the local domain is declared down, which is a read-only field.
Table 5-125. PIM Basic Settings Page Parameters (Continued)
Parameter Description
Comments to this Manuals