Supermicro SSE-X24S User Manual download pdf (Page 15)

1-1

Chapter 1

Introduction

1-1 Introduction

This document is designed to provide Supermicro Switch users with the information

required to configure the basic functionalities on the switch through the Web graphical

user interface (GUI).

Supermicro Switch products can be configured through Web browsers like Internet

Explorer or Mozilla Firefox. To manage a switch through a web browser, type in the

management IP address in the web browser address bar. This will allow you to start

accessing the switch. For example, if the management IP address of the switch is

192.168.100.102, the switch can be accessed through the Web browser by typing http:/

/192.168.100.102 in the address bar of the web browser.

1-2 Overview

Both the SSE-G24-TG4 and the SSE-G48-TG4 1/10-Gigabit Ethernet Layer 2/3

switches include two bays for up to four 10-Gb/s uplink ports (one or two dual-port CX4

modules and/or one or two dual-port XFP modules and/or one or two dual port SFP+

modules), and either 24 (SSE-G24-TG4) or 48 (SSE-G48-TG4) duplex 1-Gb/s (RJ45)

ports for LAN interfaces (of which four are combo ports that can alternately be

connected to SFP cables with an appropriate transceiver). These Ethernet switches also

have an external serial connector for connecting to an external console.

NOTE: Most of the contents of this manual apply to all of these seven switch

products:

• SSE-G24-TG4

• SSE-G48-TG4

• SSE-X24S/R

• SSE-X3348S/R

• SBM-GEM-X2C

• SBM-GEM-X2C+

• SBM-XEM-X10SM

In a few sections the contents differ for these products. In those specific places,

the applicable product is clearly identified. So if any particular product is not

mentioned, you can assume that the contents are valid for these six products.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 305 306

No comments

Supermicro SSE-X24S User Manual Page 15