1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-50
QOS Policymap Settings
Clicking the POLICYMAP tab brings up the QOS POLICYMAP SETTINGS page (Figure 5-43),
which is used to specify action for a specified classmap. The parameters for this page
are shown in Table 5-30.
Figure 5-43. QOS Policymap Settings Page
Table 5-30. QOS Policymap Settings Page Parameters
Parameter Description
Policy Map ID
This parameter specifies the unique ID for Policymap. The value ranges between
1 and 65535.
Class Map ID This parameter specifies the CLASS MAP ID to associate with Policymap.
Traffic Rate This parameter specifies the T
RAFFIC RATE of data that has to be applied.
In-Profile Action
This parameter specifies the action to be applied on matched data, and can be
specified as either Policy DSCP or Policy Precedence.
Out-Profile Action
This parameter specifies the action to be applied on out-of-profile data, and can
be specified as either Policy DSCP or Drop.
In-Profile Action
Value
The IN-PROFILE ACTION VALUE can be specified from 0 to 7 for DSCP, or from 0 to
63 for IP Precedence.
Out-Profile Action
Value
The O
UT-PROFILE ACTION VALUE can be specified as Drop or from 0 to 63 for
DSCP.
Comments to this Manuals