Supermicro 6016GT-TF User Manual download pdf (Page 75)

Chapter 7: BIOS

7-5

Hit 'Del' Message Display

This feature displays "Press DEL to run Setup" during POST. The options are

Enabled and Disabled.

Interrupt 19 Capture

Interrupt 19 is the software interrupt that handles the boot disk function. When this

item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt

19 at boot and allow the drives that are attached to these host adaptors to function

as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-

tors will not capture Interrupt 19, and the drives attached to these adaptors will not

function as bootable devices. The options are Enabled and Disabled.

Power Conﬁ guration

Power Button Function

If set to Instant_Off, the system will power off immediately as soon as the user hits

the power button. If set to 4_Second_Override, the system will power off when the

user presses the power button for 4 seconds or longer. The options are Instant_Off

and 4_Second_Override.

Restore on AC Power Loss

Use this feature to set the power state after a power outage. Select Power-Off for

the system power to remain off after a power loss. Select Power-On for the system

power to be turned on after a power loss. Select Last State to allow the system to

resume its last state before a power loss. The options are Power-On, Power-Off

and Last State.

Watch Dog Timer

If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive

for more than 5 minutes. The options are Enabled and Disabled.

XProcessor and Clock Options

This submenu allows the user to conﬁ gure the Processor and Clock settings.

Ratio CMOS Setting

This option allows the user to set the ratio between the CPU Core Clock and the

FSB Frequency. (Note: if an invalid ratio is entered, the AMI BIOS will restore the

setting to the previous state.) The default setting depends on the type of CPU

installed on the motherboard. The default setting for the CPU installed in your

motherboard is [18]. Press "+" or "-" on your keyboard to change this value. An

Auto setting is also included.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 105 106

No comments

Supermicro 6016GT-TF User Manual Page 75