Supermicro 6016GT-TF User Manual download pdf (Page 40)

5-6

SUPERSERVER 6016XT-TF/6016GT-TF/TF-TM2/TF-TC2 User's Manual

After removing the plastic cap, use 1.

your thumb and the index ﬁ nger

to hold the CPU at the north and

south center edges.

Align the CPU key (the semi-circle 2.

cutout) with the socket key (the

notch below the gold color dot on

the side of the socket).

Once the CPU and the socket are 3.

aligned, carefully lower the CPU

straight down into the socket.

Do not rub the CPU against the

surface of the socket or its pins to

avoid damaging the CPU or the

socket.

With the CPU in the socket, in-4.

spect the four corners of the CPU

to make sure that it sits level and

is properly installed.

Once the CPU is securely seated 5.

in the socket, lower the CPU load

plate to the socket.

Use your thumb to gently push the 6.

socket clip down to the clip lock.

Important! Please save the plastic

cap. The serverboard must be shipped

with the plastic cap properly installed to

protect the CPU socket pins. Shipment

without the plastic cap properly installed

may cause damage to the socket pins.

CPU

CPU Socket

Load Plate

CPU

Align CPU keys with socket keys.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 105 106

No comments

Supermicro 6016GT-TF User Manual Page 40