Supermicro 6016GT-TF User Manual download pdf (Page 55)

Chapter 5: Advanced Serverboard Setup

5-21

5-10 Onboard Indicators

LAN1/2 LEDs

The Ethernet ports have two LEDs. On

each port, one LED indicates activity while

the other LED may be green, amber or

off to indicate the speed of the connec-

tion. See the table on the right for the

functions associated with the connection

speed LED.

Note: the dedicated IPMI LAN does not

operate at 1 Gb/s.

LAN1/2 LED

(Connection Speed Indicator)

LED Color Deﬁ nition

Off No connection or 10 Mb/s

Green 100 Mb/s

Amber 1 Gb/s

Onboard Power LED (LE1)

An Onboard Power LED is located at

LE1. This LED Indicator is on when the

system is on. Be sure to unplug the AC

power cable before removing or adding any

components. See the table on the right for

more details.

Onboard PWR LED Indicator

LED Color Deﬁ nition

Off System Off (power cable

not connected)

Green System On

Green:

Flashing

Quickly

ACPI S1 State

BMC Activity LED (LE2)

A BMC Heartbeat LED is located at LE2.

When LE2 is on, BMC (Baseboard Man-

agement Controller) is active.

Rear UID LED (LED4)

The UID LED is used to help locate the

server for servicing. See the description of

SW1 in Section 5-9 for more details.

BMC Enable/Disable

Jumper Settings

Both Jumpers Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

BMC Enable/Disable

Use jumper JPBMC1 to enable or disable

the Winbond WPCM450 BMC (Baseboard

Management Controller), which supports

IPMI 2.0. See the table on the right for

jumper settings.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 105 106

Comments to this Manuals

No comments