Supermicro X10DRH-I User Manual download pdf (Page 87)

Chapter 4: AMI BIOS

4-13

L0s Support

When this item is set to Disable, IIO will not put its transmitter in the L0s state.

The default setting is Disable.

Socket 0 PCIeD01F0 - Port 1A/Socket 0 PCIeD02F0

- Port 2A/Socket 0 PCIeD20F2 - Port 2C/Socket 0

PCIeD03F0 - Port 3A/Socket 0 PCIeD03F2 - Port 3C

PCI-E Port

Select Enable to enable the PCI-E port specied by the user. The options are

Auto, Enable, and Disable.

Hot Plug Capable

Select Enable to enable hot-plugging support for the PCI-E port specied by the

user to allow the user to replace the device installed on the port without shutting

down the system. The options are Disable and Enable.

PCI-E Port Link

Select Disable to disable the link that is not involved in training activities, but its

CFG is still active. The options are Enable and Disable.

Link Speed

Use this item to select the link speed for the PCI-E port specied by the user.

The options are GEN1 (2.5 GT/s), GEN2 (5 GT/s), GEN3 (8 GT/s), and Auto.

PCI-E Port DeEmphasis

Use this item to select the De-Emphasis control setting for a PCI-E port specied

by the user. The options are -6.0 dB and -3.5 dB.

The following items will be display:

•PCI-E Port Link Status

•PCI-E Port Link Max

•PCI-E Port Link Speed

PCI-E Port L0s Exit Latency

Use this item to set the length of time required for the port specied by the user

to complete the transition from L0s to L0. The default setting is 4uS - 8uS.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 130 131

No comments

Supermicro X10DRH-I User Manual Page 87