Supermicro X10DRH-I User Manual download pdf (Page 111)

Chapter 4: AMI BIOS

4-37

The following settings will be displayed:

Data Bits, Parity, Stop Bits

Enabling TPM in the BIOS

The steps below describe the proper procedure on how to enable the TPM in the

BIOS. This process is necessary to activate support in the system before you can

start using the TPM.

1. Enter the BIOS setup screen. You may do this either from the IPMI remote

console or from the server directly using KVM. Reboot the system and press

the <Del> key as the system boots until you reach the BIOS screen.

2. You will be presented with the BIOS setup main screen. Using the arrow

keys, navigate to the Advanced tab. From there, navigate down and select the

"CPU Conguration" option as shown below. Press <Enter>.

3. You will be taken to the CPU Conguration page. Using the arrow keys, navi-

gate down to the "Intel Virtualization Technology" option and press <Enter>.

Select "Enable" and press <Enter>.

4. Once you have enabled virtualization support, press your <Esc> key until you

are back to the Advanced tab. Navigate down to the "Trusted Computing"

option and press <Enter>.

5. The Trusted Computing window will appear. Select "TPM State" and press

<Enter>.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 130 131

No comments

Supermicro X10DRH-I User Manual Page 111