Supermicro X10SRH-CF User Manual

X10SRH-CF/CLN4FUSER’S MANUAL Revision 1.0

x X10SRH-CF/CLN4F User’s ManualAdvanced Power Management Conguration ... 4-8Power Technology ...

4-26 X10SRH-CF/CLN4F Motherboard User’s ManualOnboard LAN1 Option ROM/Onboard LAN2 Option ROM/Onboard LAN3 Option ROM/Onboard LAN4 Option

Chapter 4: AMI BIOS4-27Device SettingsThis item displays the base I/O port address and the Interrupt Request address of a serial port specied by the

4-28 X10SRH-CF/CLN4F Motherboard User’s Manualclient computer. A lower transmission speed may be required for long and busy lines. The opt

Chapter 4: AMI BIOS4-29Use this item to select the number of rows and columns used in Console Redi-rection for legacy OS support. The options are 80x

4-30 X10SRH-CF/CLN4F Motherboard User’s ManualUse this feature to set the data transmission size for Console Redirection. The options are

Chapter 4: AMI BIOS4-31This feature selects Function Keys and KeyPad settings for Putty, which is a terminal emulator designed for the Windows OS. The

4-32 X10SRH-CF/CLN4F Motherboard User’s ManualUse this item to set the ow control for Console Redirection to prevent data lo

Chapter 4: AMI BIOS4-33ACPI Settings WHEA SupportSelect Enabled to support the Windows Hardware Error Architecture (WHEA) plat-form and provide a com

4-34 X10SRH-CF/CLN4F Motherboard User’s Manual4-4 Event LogsUse this feature to congure Event Log settings.Change SMBIOS Event Log Set

Chapter 4: AMI BIOS4-35Memory Correctable Error ThresholdUse this item to enter the threshold value for correctable memory errors. The default setting

xiTable of ContentsAbove 4G Decoding (Available if the system supports 64-bit PCI decoding) 4-24SR-IOV (Available if the system supports Single-Root V

4-36 X10SRH-CF/CLN4F Motherboard User’s Manual4-5 IPMIUse this feature to congure Intelligent Platform Management Interface (I

Chapter 4: AMI BIOS4-37When SEL is FullThis feature allows the user to determine what the BIOS should do when the sys-tem event log is full. Select Er

4-38 X10SRH-CF/CLN4F Motherboard User’s Manual4-6 Security SettingsThis menu allows the user to congure the following security

Chapter 4: AMI BIOS4-394-7 Boot SettingsUse this feature to congure Boot Settings:Boot CongurationSetup Prompt TimeoutUse this item to indicate how

4-40 X10SRH-CF/CLN4F Motherboard User’s Manual•Dual Boot Order #7•Dual Boot Order #8•Dual Boot Order #9•Dual Boot Order #10•Dual Boot

Chapter 4: AMI BIOS4-41Hard Disk Drive BBS Priorities•Legacy Boot Order #1 - Legacy Boot Order #10Network Drive BBS Priorities•Legacy Boot Order #

4-42 X10SRH-CF/CLN4F Motherboard User’s Manual4-8 Save & ExitSelect the Save & Exit tab from the BIOS setup screen to

Chapter 4: AMI BIOS4-43Restore DefaultsTo set this feature, select Restore Defaults from the Exit menu and press <Enter>. These are manufacture

4-44 X10SRH-CF/CLN4F Motherboard User’s ManualNotes

Appendix A: POST Error Beep CodesA-1Appendix A BIOS Error Beep Codes During the POST (Power-On Self-Test) routines, which are performed each time th

xii X10SRH-CF/CLN4F User’s ManualHigh Precision Timer ... 4-33NUMA (Avail

A-2 X10SRH-CF/CLN4F User’s ManualNotes

Appendix B: Software Installation InstructionsB-1Appendix B Software Installation Instructions B-1 Installing Software ProgramsThe Supermicro ftp

B-2 X10SRH-CF/CLN4F Motherboard User’s ManualB-2 Installing SuperDoctor5The Supermicro SuperDoctor® 5 is a hardware monitoring program that function

Appendix C: UEFI BIOS RecoveryC-1Appendix C UEFI BIOS Recovery Instructions Warning: Do not upgrade the BIOS unless your system has a BIOS-related i

C-2 X10SRH-CF/CLN4F User’s Manual5. When the screen as shown above displays, using the arrow key, select the item- "Proceed with ash update&quo

Appendix C: UEFI BIOS RecoveryC-36. After the process of BIOS Recovery is complete, press any key to reboot the system.7. Using a different system,

C-4 X10SRH-CF/CLN4F User’s Manual9. After seeing the message that BIOS update is completed, unplug the AC pow-er cable from the power supply to clear

Appendix D: Dual Boot BlockD-1Appendix DDual Boot Block on Grantley PlatformsOverviewOn X10 Grantley platforms, Supermicro introduces the Dual Boot Bl

D-2 X10SRH-CF/CLN4F User’s ManualD-1 IPMI GUI BrowserTo perform perform the Dual Boot Block through the IPMI GUI browser, follow the instructions bel

Appendix D: Dual Boot BlockD-33. Click on the Remote Control tab, then Console Redirection, then the Launch Console button to open the Java iKVM View

xiiiBoot Mode Select ... 4-39Fixed Boot Order Priorities ...

D-4 X10SRH-CF/CLN4F User’s Manual5. In the Virtual Media loader, click on the Device1 tab, then Logical Drive Type drop-down menu, then select the US

Appendix D: Dual Boot BlockD-57. After the system powers on, the secondary boot block starts to initialize the essential hardware components and loca

D-6 X10SRH-CF/CLN4F User’s Manual9. A message box will appear to indicate the BIOS recovery ash process is complete. Press ENTER to nish. The syste

Appendix D: Dual Boot BlockD-7D-2 IPMI Command SetsTo perform perform the Dual Boot Block through the IPMI Command Sets, follow the instructions belo

D-8 X10SRH-CF/CLN4F User’s Manual3. Enable BIOS Resilience mode in remote IPMI and conrm. •To enable, type the following command in the command pro

Appendix D: Dual Boot BlockD-95. Power on the remote system for BIOS recovery ash.•To power on, type: ipmi power upAfter the system powers on, the

D-10 X10SRH-CF/CLN4F User’s ManualNotes

(Disclaimer Continued)The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear fa

xiv X10SRH-CF/CLN4F User’s ManualNotes

Chapter 1: Introduction1-1Chapter 1 Introduction1-1 OverviewChecklistCongratulations on purchasing your computer motherboard from an acknowledged le

1-2 X10SRH-CF/CLN4F User’s Manual X10SRH-CF/CLN4F Motherboard ImageNote: All graphics shown in this manual were based upon the latest PCB Revision a

Chapter 1: Introduction1-3X10SRH-CF/CLN4F Motherboard LayoutNotes:•See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front panel c

1-4 X10SRH-CF/CLN4F User’s ManualX10SRH-CF/CLN4F JumpersJumper Description DefaultJBR1 BIOS Recovery Pins 1-2 (Normal)JBT1 CMOS Clear (See Chapter 2)J

Chapter 1: Introduction1-5X10SRH-CF/CLN4F Headers/ConnectorsConnector DescriptionBT1 Onboard BatteryCOM1/COM2 COM1 (Port)/COM2 (Header)Fan1 - Fan5

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccur

1-6 X10SRH-CF/CLN4F User’s ManualX10SRH-CF/CLN4F LED IndicatorsLED Description State/Color StatusLE1 UID LED Blue On Unit IdentiedLE2 Power LED On Po

Chapter 1: Introduction1-7Motherboard FeaturesCPU Single Intel® E5-2600/1600 Series Processor in an LGA2011 R3 socket.Memory Supports DDR4 memory up

1-8 X10SRH-CF/CLN4F User’s ManualPlug and Play (PnP), DMI 2.3, PCI 2.3, ACPI 1.0/2.0/3.0, USB Keyboard and SMBIOS 2.5Power Conguration ACPI/APM Power

Chapter 1: Introduction1-9System Block DiagramNote: This is a general block diagram and may not exactly represent the features on your motherboard. Se

1-10 X10SRH-CF/CLN4F User’s ManualSystem Block DiagramNote: This is a general block diagram and may not exactly represent the features on your motherb

Chapter 1: Introduction1-111-2 Chipset Overview The X10SRH-CF/CLN4F supports a single Intel® E5-2600/1600 Series Processor in an LGA2011 R3 socket. B

1-12 X10SRH-CF/CLN4F User’s Manual1-3 Special FeaturesRecovery from AC Power LossBasic I/O System (BIOS) provides a setting for you to determine how

Chapter 1: Introduction1-131-5 ACPI FeaturesACPI stands for Advanced Conguration and Power Interface. The ACPI specica-tion denes a exible a

1-14 X10SRH-CF/CLN4F User’s Manualto shield the computer from noise. It is recommended that you also install a power surge protector to help avoid pro

Chapter 2: Installation2-1Chapter 2 Installation2-1 Standardized Warning StatementsThe following statements are industry-standard warnings, provided

iiiPrefacePrefaceThis manual is written for system integrators, IT professionals, and knowledgeable end users. It provides information for the insta

2-2 X10SRH-CF/CLN4F User’s ManualAttention Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer que par une

Chapter 2: Installation2-3Product Disposal Warning! Ultimate disposal of this product should be handled according to all national laws and regulations

2-4 X10SRH-CF/CLN4F User’s Manual2-2 Static-Sensitive DevicesElectrostatic-Discharge (ESD) can damage electronic com ponents. To avoid dam-aging you

Chapter 2: Installation2-5DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-311

2-6 X10SRH-CF/CLN4F User’s ManualInstalling the Motherboard1. Install the I/O shield into the back of the chassis. 2. Locate the mounting holes on t

Chapter 2: Installation2-72-4 Processor and Heatsink InstallationWarning: When handling the processor package, avoid placing direct pressure on the

2-8 X10SRH-CF/CLN4F User’s ManualGently push down to pop the load plate open.2. Press the second load lever labeled 'Close 1st' to release

Chapter 2: Installation2-94. Using your thumb and the index nger, loosen the CPU lever and open the load plate.5. Use your thumb and index nger to

2-10 X10SRH-CF/CLN4F User’s ManualOPEN 1stOPEN 1st7. With the CPU inside the socket, inspect the four corners of the CPU to make sure that the CPU is

Chapter 2: Installation2-11OPEN 1stMotherboardScrew#1Screw#2Installing a Passive CPU Heatsink1. Do not apply any thermal grease to the heatsink or th

ivConventions Used in the Manual:Special attention should be given to the following symbols for proper system instal-lation: Warning: Critical inform

2-12 X10SRH-CF/CLN4F User’s ManualRemoving the HeatsinkWarning: We do not recommend that the CPU or the heatsink be removed. However, if you do need t

Chapter 2: Installation2-13DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-14 X10SRH-CF/CLN4F User’s ManualRemoving Memory ModulesReverse the steps above to remove the DIMM modules from the motherboard.Memory SupportThe X10

Chapter 2: Installation2-15Possible System Memory Allocation & AvailabilitySystem Device Size Physical Memory Remaining (-Available)(4 GB Total S

2-16 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-17DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-18 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-19DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-20 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-21DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

vContacting SupermicroContacting SupermicroHeadquartersAddress: Super Micro Computer, Inc.980 Rock Ave.San Jose, CA 95131 U.S.A.Tel: +1 (408) 503-800

2-22 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-23DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-24 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-25DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-26 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-27DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-28 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-29DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-30 X10SRH-CF/CLN4F User’s ManualAA. TPM/Port 80TPM Header/Port 80 HeaderA Trusted Platform Module/Port 80 header is located at JTPM1 to provide TPM

Chapter 2: Installation2-31DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

viTable of ContentsPrefaceAbout This Motherboard ... iiiM

2-32 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-33DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-34 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-35DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-36 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-37DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-38 X10SRH-CF/CLN4F User’s ManualDESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA

Chapter 2: Installation2-39DESIGNED IN USA1.00REV:X10SRH-CFSAS CODE1BIOS LICENSEIPMI CODEMAC CODEBAR CODE321123PCH SLOT2 PCI-E 2.0 X4(IN X8)LGA2011-31

2-40 X10SRH-CF/CLN4F User’s ManualNotes

3-1Chapter 3: TroubleshootingChapter 3 Troubleshooting 3-1 Troubleshooting ProceduresUse the following procedures to troubleshoot your system. If

viiTable of ContentsRemoving Memory Modules ... 2-14Memory Support ...

3-2 X10SRH-CF/CLN4F User’s ManualNo Video1. If the power is on, but you have no video--in this case, you will need to re-move all the add-on cards an

3-3Chapter 3: Troubleshooting3-2 Technical Support ProceduresBefore contacting Technical Support, please make sure that you have followed all the ste

3-4 X10SRH-CF/CLN4F User’s Manual3-3 Frequently Asked QuestionsQuestion: What type of memory does my motherboard support?Answer: The X10SRH-CF/CLN4F

3-5Chapter 3: Troubleshooting3-4 Battery Removal and InstallationBattery RemovalTo remove the onboard battery, follow the steps below:1. Power off y

3-6 X10SRH-CF/CLN4F User’s Manual3-5 Returning Merchandise for ServiceA receipt or copy of your invoice marked with the date of purchase is required

Chapter 4: AMI BIOS4-1Chapter 4 BIOS 4-1 IntroductionThis chapter describes the AMI BIOS setup utility for the X10DRL-CF/CLN4F. The ROM BIOS is st

4-2 X10SRH-CF/CLN4F Motherboard User’s ManualHow to Start the Setup UtilityNormally, the only visible Power-On Self-Test (POST) routine is

Chapter 4: AMI BIOS4-3The following Main menu items will be displayed:System Date/System Time Use this option to change the system date and time. High

4-4 X10SRH-CF/CLN4F Motherboard User’s Manual4-3 Advanced Setup CongurationsUse the arrow keys to select Advanced setup and press <E

Chapter 4: AMI BIOS4-5Wait For 'F1' If ErrorSelect Enabled to force the system to wait until the 'F1' key is pressed if an error o

viiiWatch Dog Enable/Disable ... 2-34BMC Enable ...

4-6 X10SRH-CF/CLN4F Motherboard User’s ManualCPU CongurationWarning: Setting the wrong values in the following sections may cause the sy

Chapter 4: AMI BIOS4-7Select Enable to support Intel's Hyper-threading Technology to enhance CPU per-formance. The options are Enable and Disable

4-8 X10SRH-CF/CLN4F Motherboard User’s ManualDCU ModeUse this feature to set the data-prefecting mode for the DCU (Data Cache Unit). The o

Chapter 4: AMI BIOS4-9If the option is set to Energy Efcient or Custom, the following items will display:Cong TDP (Conguring Thermal Design Power)S

4-10 X10SRH-CF/CLN4F Motherboard User’s ManualCPU C6 Report (Available when Power Technology is set to Custom)Select Enable to allow the B

Chapter 4: AMI BIOS4-11Package Clamping Limit1Use this item to set the limit on power performance states for the runtime proces-sor, with P0 being the

4-12 X10SRH-CF/CLN4F Motherboard User’s ManualPORT 1A Link SpeedThis item congures the link speed of a PCI-E port specied by the use

Chapter 4: AMI BIOS4-13IOAT (Intel® IO Acceleration) CongurationEnable IOATSelect Enable to enable Intel I/OAT (I/O Acceleration Technology) support

4-14 X10SRH-CF/CLN4F Motherboard User’s ManualQPI (Quick Path Interconnect) CongurationQPI StatusThe following information will display

Chapter 4: AMI BIOS4-15Memory CongurationEnforce PORSelect Enable to enforce POR restrictions on DDR4 frequency and voltage programming. The options

ixTable of Contentsused in the system was built. ... 4-3Memory Information ...

4-16 X10SRH-CF/CLN4F Motherboard User’s ManualChannel InterleavingUse this item to set DIMM channel interleaving mood. The options are Aut

Chapter 4: AMI BIOS4-17Patrol ScrubPatrol Scrubbing is a process that allows the CPU to correct correctable memory errors detected on a memory module

4-18 X10SRH-CF/CLN4F Motherboard User’s ManualXHCI Hand-OffThis is a work-around solution for operating systems that do not support XHCI (

Chapter 4: AMI BIOS4-19SATA CongurationWhen this submenu is selected, AMI BIOS automatically detects the presence of the SATA devices that are suppo

4-20 X10SRH-CF/CLN4F Motherboard User’s ManualPort 0 ~ Port 5 Hot PlugSelect Enabled to enable hot-plugging support for a port specied by

Chapter 4: AMI BIOS4-21Serial ATA Port 0~ Port 5This item displays the information detected on the installed SATA drives on the particular SATA port.•

4-22 X10SRH-CF/CLN4F Motherboard User’s Manual*If the item above "Congure sSATA as" is set to AHCI, the following

Chapter 4: AMI BIOS4-23Port 0 ~ Port 3 sSATA Device Type (Available when a SATA port is detected)Use this item to specify if the sSATA port specied b

4-24 X10SRH-CF/CLN4F Motherboard User’s ManualServer ME (Management Engine) CongurationThis feature displays the following system ME con

Chapter 4: AMI BIOS4-25Maximum PayloadSelect Auto for the system BIOS to automatically set the maximum payload value for a PCI-E device to enhance sys