Supermicro X9DRH-ITF User Manual download pdf (Page 94)

4-22

X9DRH-7F/-iF/-7TF/-iTF Motherboard User’s Manual

Flow Control

This feature allows the user to set the ow control for Console Redirection to

prevent data loss caused by buffer overow. Send a "Stop" signal to stop send-

ing data when the receiving buffer is full. Send a "Start" signal to start sending

data when the receiving buffer is empty. The options are None, Hardware RTS/

CTS, and Software Xon/Xoff.

Data Bits, Parity, Stop Bits

The setting for each of these features is displayed.



ACPI Settings

Use this feature to congure Advanced Conguration and Power Interface (ACPI)

power management settings for your system.

ACPI Sleep State

Use this feature to select the ACPI State when the system is in sleep mode. Select

S1 (CPU Stop Clock) to erase all CPU caches and stop executing instructions.

Power to the CPU(s) and RAM is maintained, but RAM is refreshed. Select Sus-

pend Disabled to use power-reduced mode. Power will only be supplied to limited

components (such as RAMs) to maintain the most critical functions of the system.

The options are S1 (CPU Stop Clock) and Suspend Disabled.

High Precision Timer

Select Enabled to activate the High Precision Event Timer (HPET) that produces

periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does

in synchronizing multimedia streams, providing smooth playback, reducing the de-

pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-

tion embedded in the CPU. The High Performance Event Timer is used to replace

the 8254 Programmable Interval Timer. The options are Enabled and Disabled.

Trusted Computing (Available when a TPM device is detected

by the BIOS)

Conguration

TPM Support

Select Enabled on this item and enable the TPM jumper on the motherboard to

enable TPM support to improve data integrity and network security. The options

are Enabled and Disabled.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 110 111

No comments

Supermicro X9DRH-ITF User Manual Page 94