Supermicro X9DRH-ITF User Manual download pdf (Page 100)

4-28

X9DRH-7F/-iF/-7TF/-iTF Motherboard User’s Manual

Log EFI Status Codes

Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error

Codes or Progress Codes. The options are disabled an Enabled.

Note: After making changes on a setting, be sure to reboot the system for

the changes to take effect.



BMCNetworkConguration

LAN Channel 1: This feature allows the user to congure the settings for LAN

Channel 1.

UpdateIPMILANConguration

This feature allows the BIOS to implement any IP/MAC address changes at the next

system boot. If the option is set to Yes, any changes made to the settings below will

take effect when the system is rebooted. The options are No and Yes.

CongurationAddressSource

This feature allows the user to select the source of the IP address for this com-

puter. If Static is selected, you will need to know the IP address of this computer

and enter it to the system manually in the eld. If DHCP is selected, the BIOS will

search for a DHCP (Dynamic Host Conguration Protocol) server in the network

that it is attached to and request the next available IP address for this computer.

The options are DHCP and Static.

Station IP Address

This item displays the Station IP address for this computer. This should be in decimal

and in dotted quad form (i.e., 192.168.10.253).

Subnet Mask

This item displays the sub-network that this computer belongs to. The value of each

three-digit number separated by dots should not exceed 255.

Station MAC Address

This item displays the Station Mac address for this computer. Mac addresses are

6 two-digit hexadecimal numbers.

Gateway IP Address

This item displays the Gateway IP address for this computer. This should be in

decimal and in dotted quad form (i.e., 192.168.10.253).

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 110 111

No comments

Supermicro X9DRH-ITF User Manual Page 100