Supermicro X9DRH-ITF User Manual download pdf (Page 35)

Chapter 2: Installation

2-11

X9DRH-7F/iF/7TF/iF

Rev. 1.02

Release Tabs

Notches

2-4 Installing and Removing the Memory Modules

Note: Check Supermicro's Website for recommended memory modules.

CAUTION

Exercise extreme care when installing or removing DIMM

modules to prevent any possible damage.

Installing & Removing DIMMs

1. Insert the desired number of DIMMs into the memory slots, starting with P1-

DIMM #A1. (For best memory performance, please use the modules of the

same type and speed in the same bank.)

2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.

Removing Memory Modules

Press both notches on the ends of the DIMM module to unlock it. Once the DIMM

module is loosened, remove it from the memory slot.

3. Align the DIMM module key with the receptive point on the memory slot.

4. Align the notches on the both ends of the module with the receptive points on

ends of the slot.

5. Use two thumbs together to press the notches of the module straight down

into the slot until the module snaps into place.

6. Press the release tabs to the locked positions to secure the DIMM module

into the slot.

Press both notches straight

down into the memory slot at

the same time.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 110 111

No comments

Supermicro X9DRH-ITF User Manual Page 35