Supermicro X10SDV-TLN4F User Manual download pdf (Page 84)

4-20

X10SDV-TLN4F/F Motherboard User’s Manual

Data Bits

Use this feature to set the data transmission size for Console Redirection. The

options are 7 Bits and 8 Bits.

Parity

A parity bit can be sent along with regular data bits to detect data transmission

errors. Select Even if the parity bit is set to 0, and the number of 1's in data bits

is even. Select Odd if the parity bit is set to 0, and the number of 1's in data bits

is odd. Select None if you do not want to send a parity bit with your data bits in

transmission. Select Mark to add a mark as a parity bit to be sent along with the

data bits. Select Space to add a Space as a parity bit to be sent with your data

bits. The options are None, Even, Odd, Mark and Space.

Stop Bits

A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard

serial data communication. Select 2 Stop Bits if slower devices are used. The op-

tions are 1 and 2.

Flow Control

Use this feature to set the ow control for Console Redirection to prevent data loss

caused by buffer overow. Send a "Stop" signal to stop sending data when the re-

ceiving buffer is full. Send a "Start" signal to start sending data when the receiving

buffer is empty. The options are None and Hardware RTS/CTS.

VT-UTF8 Combo Key Support

Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 ter-

minals. The options are Enabled and Disabled.

Recorder Mode

Select Enabled to capture the data displayed on a terminal and send it as text mes-

sages to a remote server. The options are Disabled and Enabled.

Resolution 100x31

Select Enabled for extended-terminal resolution support. The options are Disabled

and Enabled.

Legacy OS Redirection Resolution

Use this feature to select the number of rows and columns used in Console Redi-

rection for legacy OS support. The options are 80x24 and 80x25.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 110 111

No comments

Supermicro X10SDV-TLN4F User Manual Page 84