Supermicro X10SDV-TLN4F User Manual download pdf (Page 72)

4-8

X10SDV-TLN4F/F Motherboard User’s Manual

Intel

Virtualization Technology (Available when supported by the CPU)

Select Enabled to support Intel

Virtualization Technology, which will allow one

platform to run multiple operating systems and applications in independent parti-

tions, creating multiple "virtual" systems in one physical computer. The options

are Enable and Disable.

Note: If a change is made to this setting, you will need to reboot the

system for the change to take effect. Refer to Intel’s website for detailed

information.

Advanced Power Management Conguration

This section is used to congure the following CPU Power Management settings.

EIST (P-States)

EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically

adjust processor voltage and core frequency to reduce power consumption and

heat dissipation. The options are Disable and Enable.

If the above is set to Enable, CPU P State will display:

CPU P State Control

P State Domain

This feature allows the user to indicate the P-State domain for each logical

process in the system. All processes indicate the same domain in the same

package. The options are ALL and ONE.

P-State Coordination

This feature allows the user to change the P-State (Power-Performance State)

coordination type. P-State is also known as "SpeedStep" for Intel processors. Se-

lect HW_ALL to change the P-State coordination type for hardware components

only. Select SW_ALL to change the P-State coordination type for all software

installed in the system. Select SW_ANY to change the P-State coordination

type for a software program in the system. The options are HW_All, SW_ALL,

and SW_ANY.

Energy Efcient P-State

Select Enable to support power-saving mode for P-State. The options are Dis-

able and Enable.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 110 111

No comments

Supermicro X10SDV-TLN4F User Manual Page 72