Supermicro X10SDV-TLN4F User Manual download pdf (Page 88)

4-24

X10SDV-TLN4F/F Motherboard User’s Manual

Flow Control

Use this item to set the ow control for Console Redirection to prevent data loss

caused by buffer overow. Send a "Stop" signal to stop sending data when the re-

ceiving buffer is full. Send a "Start" signal to start sending data when the receiving

buffer is empty. The options are None, Hardware RTS/CTS, and Software Xon/Xoff.

Data Bits

Use this feature to set the data transmission size for Console Redirection. The

options are 7 (Bits) and 8 (Bits).

Parity

A parity bit can be sent along with regular data bits to detect data transmission

errors. Select Even if the parity bit is set to 0, and the number of 1's in data bits

is even. Select Odd if the parity bit is set to 0, and the number of 1's in data bits

is odd. Select None if you do not want to send a parity bit with your data bits in

transmission. Select Mark to add a mark as a parity bit to be sent along with the

data bits. Select Space to add a Space as a parity bit to be sent with your data

bits. The options are None, Even, Odd, Mark and Space.

Stop Bits

A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard

serial data communication. Select 2 Stop Bits if slower devices are used. The op-

tions are 1 and 2.



ACPI Settings

WHEA Support

This feature Enables the Windows Hardware Error Architecture (WHEA) support for

the Windows 2008 (or a later version) operating system. The options are Enabled

and Disabled.

High Precision Event Timer

Select Enabled to activate the High Performance Event Timer (HPET) that produces

periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in

synchronizing multimedia streams, providing smooth playback and reducing the de-

pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-

tion embedded in the CPU. The High Performance Event Timer is used to replace

the 8254 Programmable Interval Timer. The options are Enabled and Disabled.

PCI AER Support

Select Enabed to enable the ACPI OS to manage PCI Advanced Error Reporting.

The options are Enabled and Disabled.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 110 111

No comments

Supermicro X10SDV-TLN4F User Manual Page 88