Supermicro H8SCM-F User Manual download pdf (Page 56)

4-8

H8SCM(-F) Serverboard User’s Manual

S.M.A.R.T.

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict

impending drive failures. Select "Auto" to allow BIOS to auto detect hard

disk drive support. Select "Disabled" to prevent AMI BIOS from using the

S.M.A.R.T. Select "Enabled" to allow AMI BIOS to use the S.M.A.R.T. to sup-

port hard drive disk. The options are Disabled, Enabled, and Auto.

32-Bit Data Transfer

Select "Enabled" to activate the function of 32-Bit data transfer. Select "Dis-

abled" to deactivate the function. The options are Enabled and Disabled.

IDE Detect Timeout (Sec)

Use the +/- keys to adjust and select the time out for detecting ATA/ATAPI

devices. The default value is 35.

 PCI/PnP Conﬁ guration

Clear NVRAM

Select Yes to clear NVRAM during boot-up. The options are Yes and No.

Plug & Play O/S

Select Yes to allow the OS to conﬁ gure Plug & Play devices. (This is not required

for system boot if your system has an OS that supports Plug & Play.) Select No

to allow AMIBIOS to conﬁ gure all devices in the system.

PCI Latency Timer

This option sets the latency of all PCI devices on the PCI bus. Select a value

to set the PCI latency in PCI clock cycles. Options are 32, 64, 96, 128, 160,

192, 224 and 248.

PCI IDE Busmaster

Use this setting to Enable or Disable BIOS enabled uses of PCI Busmastering

for reading or writing to IDE drives.

ROM Scan Ordering

This setting determines which kind of option ROM activates prior to another.

Options include Onboard First and Addon First.

PCI Slot 4

These settings Enable or Disable the speciﬁ ed PCI slot in your system.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 71 72

No comments

Supermicro H8SCM-F User Manual Page 56