Supermicro H8SCM-F User Manual download pdf (Page 54)

4-6

H8SCM(-F) Serverboard User’s Manual

OHCI/EHCI HC Device Functions

These settings allow you to either Enable or Disable functions for OHCI or EHCI

bus devices.

USB 2.0 Controller Mode

Use this setting to conﬁ gure the USB 2.0 Controller in either Hi-Speed (480

Mps) or Full Speed (12 Mps) mode. Options include Enabled (Hi-Speed Mode)

or Disabled (Full Speed Mode).

Legacy USB Support

Select "Enabled" to enable the support for USB Legacy. Disable Legacy support

if there are no USB devices installed in the system. "Auto" disabled Legacy

support if no USB devices are connected. The options are Disabled, Enabled

and Auto.

Route Port 80h Cycles To

This option allows you to set route 80h cycles to either PCI or LPC.

 IDE Conﬁ guration

Onboard PCI IDE Controller

This setting allows you to Enable or Disable the PCI IDE controller.

On Chip SATA Channel

This setting allows you to Enable or Disable the OnChip SATA channel.

On Chip SATA Type

Use this setting to set the On Chip SATA type. Options include

Native IDE, RAID, AHCI and Legacy IDE.

SATA IDE Combined Mode

This setting allows you to Enable or Disable the SATA IDE combined mode.

PATA Channel Conﬁ guration

This allows you to set PATA channel conﬁ guration. Options include SATA as

Primary or SATA as secondary.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 71 72

No comments

Supermicro H8SCM-F User Manual Page 54