Supermicro SYS-6015C-URV Datasheet download pdf (Page 16)

2-2

UPERSERVER 6015C-UR/6015C-U/6015C-NTR/6015C-NT User's Manual

Warnings and Precautions!

Choosing a Setup Location

Leave enough clearance in front of the rack to enable you to open the front door

completely (~25 inches) and approximately 30 inches of clearance in the back

of the rack to allow for sufﬁ cient airﬂ ow and ease in servicing.This product is for

installation only in a Restricted Access Location (dedicated equipment rooms,

service closets and the like).

This product is not suitable for use with visual display work place devices

acccording to §2 of the the German Ordinance for Work with Visual Display

Units.

•

Rack Precautions

Ensure that the leveling jacks on the bottom of the rack are fully extended to

the ﬂ oor with the full weight of the rack resting on them.

In single rack installation, stabilizers should be attached to the rack. In multiple

rack installations, the racks should be coupled together.

Always make sure the rack is stable before extending a component from the

rack.

You should extend only one component at a time - extending two or more si-

multaneously may cause the rack to become unstable.

Server Precautions

Review the electrical and general safety precautions in Chapter 4.

Determine the placement of each component in the rack before you install the

rails.

Install the heaviest server components on the bottom of the rack ﬁ rst, and then

work up.

Use a regulating uninterruptible power supply (UPS) to protect the server from

power surges, voltage spikes and to keep your system operating in case of a

power failure.

•

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 109 110

No comments

Supermicro SYS-6015C-URV Datasheet Page 16