Supermicro SuperServer 6018R-WTR User Manual download pdf (Page 73)

Chapter 5: Advanced Serverboard Setup

5-23

C to PCI-E

Jumper Setting

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled (Default)

ME Mode Select

Jumper Settings

Jumper Setting Deﬁ nition

1-2 Normal (Default)

2-3 Manufacture Mode

C Bus to PCI-E Slots

Use Jumpers JI

C1 and JI

C2 to

connect the System Management Bus

C) to PCI-Express slots to improve

PCI performance. These two jumpers

are to be set at the same time. The

default setting is on pins 2-3 to disable

the connection for normal operations.

See the table on the right for jumper

settings.

Manufacturer Mode Select

Close pin 2 and pin 3 of Jumper

JPME2 to bypass SPI ﬂ ash security

and force the system to operate in the

Manufacturer mode, which will allow

the user to ﬂ ash the system ﬁ rmware

from a host server for system setting

modiﬁ cations. See the table on the

right for jumper settings.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 125 126

No comments

Supermicro SuperServer 6018R-WTR User Manual Page 73