Supermicro SuperServer 6018R-WTR User Manual download pdf (Page 21)

Chapter 2: Server Installation

2-5

Figure 2-1. Identifying the Sections of the Rack Rails

(right side rail shown)

2-5 Installing the System into a Rack

This section provides information on installing the SuperServer 6018R-WTR(T) into

a rack unit with the rack rails provided. If the system has already been mounted

into a rack, you can skip ahead to Sections 2-5 and 2-6.

There are a variety of rack units on the market, which may mean the assembly

procedure will differ slightly. You should also refer to the installation instructions that

came with the rack unit you are using.

Identifying the Sections of the Rack Rails

You should have received two rack rail assemblies in the rack mounting kit. Each

assembly consists of two sections: an inner ﬁ xed chassis rail that secures directly

to the server chassis and an outer ﬁ xed rack rail that secures directly to the rack

itself (see Figure 2-1). Two pairs of short brackets to be used on the front side of

the outer rails are also included.

Installing the Inner Rails

Both the left and right side inner rails have been pre-attached to the chassis.

Proceed to the next step.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 125 126

No comments

Supermicro SuperServer 6018R-WTR User Manual Page 21