Supermicro X9DB3-F User Manual download pdf (Page 93)

Chapter 4: AMI BIOS

4-21

Flow Control

This feature allows the user to set the ow control for Console Redirection to

prevent data loss caused by buffer overow. Send a "Stop" signal to stop send-

ing data when the receiving buffer is full. Send a "Start" signal to start sending

data when the receiving buffer is empty. The options are None and Hardware

RTS/CTS.

VT-UTF8 Combo Key Support

Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100

terminals. The options are Enabled and Disabled.

Recorder Mode

Select Enabled to capture the data displayed on a terminal and send it as text

messages to a remote server. The options are Disabled and Enabled.

Resolution 100x31

Select Enabled for extended-terminal resolution support. The options are Dis-

abled and Enabled.

Legacy OS Redirection Resolution

Use this feature to select the number of rows and columns used in Console

Redirection for legacy OS support. The options are 80x24 and 80x25.

Putty KeyPad

This feature selects Function Keys and KeyPad settings for Putty, which is a

terminal emulator designed for the Windows OS. The options are VT100, LINUX,

XTERMR6, SC0, ESCN, and VT400.

Redirection After BIOS POST

If Always Enabled is selected, Legacy Console Redirection will be enabled for

Legacy OS after BIOS POST (Power-On Self Test) is completed. The options

are Always Enabled, and BootLoader.

Serial Port for Out-of-Band Management/Windows Emergency Management

Services (EMS)

The submenu allows the user to congure Console Redirection settings to support

Out-of-Band Serial Port management.

COM1 Console Redirection (for EMS)

Select Enabled to use COM Port 1 for Console Redirection. The options are En-

abled and Disabled.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 112 113

No comments

Supermicro X9DB3-F User Manual Page 93