Supermicro X9DB3-F User Manual download pdf (Page 90)

4-18

X9DB3-F/X9DBi-F/X9DB3-TPF/X9DBi-TPF Motherboard User’s Manual

Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM

Select Enabled to enable the onboard LAN1 Option ROM/LAN2 Option ROM. This

is to boot the computer using a network device. The default setting for LAN1 Op-

tion ROM is Enabled, and the default setting for LAN2 Option ROM is Disabled.

Load Onboard SAS Option ROM

Select Enabled to enable the onboard SAS Option ROM. This is to boot the com-

puter using a SAS device. The options are Enabled and Disabled.

VGA Priority

This feature allows the user to select the graphics adapter to be used as the primary

boot device. The options are Onboard, and Offboard.

Network Stack

When this featurer is set to Enabled, both PXE (Preboot Execution Environment)

and UEFI (Unied Extensible Firmware Interface) will be enabled for network stack

support. The options are Enabled and Disabled.

SuperIOConguration

Super IO Chip: This item displays the Super IO chip used in the motherboard.

SerialPort1Conguration

Serial Port

Select Enabled to enable a serial port specied by the user. The options are En-

abled and Disabled.

Device Settings

This item displays the settings of Serial Port 1.

Change Settings

This option species the base I/O port address and the Interrupt Request address

of Serial Port 1. Select Disabled to prevent the serial port from accessing any

system resources. When this option is set to Disabled, the serial port becomes

unavailable. The options are Auto, IO=3F8h; IRQ=4; IO=3F8h; IRQ=3; IO=2F8h;

IRQ=3; IO=3E8h; IRQ=5; IO=2E8h; IRQ=7; IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;

IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; and

IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 112 113

No comments

Supermicro X9DB3-F User Manual Page 90