Supermicro X9DB3-F User Manual download pdf (Page 100)

4-28

X9DB3-F/X9DBi-F/X9DB3-TPF/X9DBi-TPF Motherboard User’s Manual

When SEL is Full

This feature allows the user to decide what the BIOS should do when the system

event log is full. Select Erase Immediately to erase all events in the log when the

system event log is full. The options are Do Nothing and Erase Immediately.

Custom EFI Logging Options

Log EFI Status Codes

Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error

Codes or Progress Codes. The options are Enabled and Disabled.

Note: After making changes on a setting, be sure to reboot the system for

the changes to take effect.

BMCNetworkConguration

LAN Channel 1: This feature allows the user to congure the settings for LAN1 Port.

IPMI LAN Selection: This feature displays the available IPMI LAN modes.

IPMI Network Link Status: This feature displays the IPMI Network Link status.

UpdateIPMILANConguration

This feature allows the BIOS to implement any IP/MAC address changes at the next

system boot. If the option is set to Yes, any changes made to the settings below will

take effect when the system is rebooted. The options are No and Yes.

CongurationAddressSource

This feature allows the user to select the source of the IP address for this computer.

If Static is selected, you will need to know the IP address of this computer and enter

it to the system manually in the eld. If DHCP is selected, the BIOS will search for

a DHCP (Dynamic Host Conguration Protocol) server in the network that is at-

tached to and request the next available IP address for this computer. The options

are DHCP and Static. The following items are assigned IP addresses automatically

if DHCP is selected, or can be congured manually if Static is selected.

Station IP Address

This item displays the Station IP address for this computer. This should be in decimal

and in dotted quad form (i.e., 192.168.10.253).

Subnet Mask

This item displays the sub-network that this computer belongs to. The value of each

three-digit number separated by dots should not exceed 255.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 112 113

No comments

Supermicro X9DB3-F User Manual Page 100