Supermicro X8DTU-6TF+ User Manual download pdf (Page 69)

4-1

Chapter 4: Troubleshooting

Chapter 4

Troubleshooting

4-1 Troubleshooting Procedures

Use the following procedures to troubleshoot your system. If you have followed all

of the procedures below and still need assistance, refer to the ‘Technical Support

Procedures’ and/or ‘Returning Merchandise for Service’ section(s) in this chapter.

Note: Always disconnect the power cord before adding, changing or installing any

hardware components.

Before Power On

Make sure that there are no short circuits between the motherboard and 1.

chassis.

Disconnect all ribbon/wire cables from the motherboard, including those for 2.

the keyboard and mouse.

Remove all add-on cards.3.

Install CPU 1 ﬁ rst (-making sure it is fully seated) and connect the front panel 4.

connector to the motherboard.

No Power

Make sure that no short circuits between the motherboard and the chassis.1.

Make sure that the ATX power connectors are properly connected2.

Check that the 115V/230V switch on the power supply is properly set, if avail-3.

able.

Turn the power switch on and off to test the system, if applicable.4.

The battery on your motherboard may be old. Check to verify that it still sup-5.

plies ~3VDC. If it does not, replace it with a new one.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 110 111

ChrisKed 02 Apr 2024 | 03:29:24

Hello, im noob :)

Supermicro X8DTU-6TF+ User Manual Page 69