Supermicro X8DTU-6TF+ User Manual download pdf (Page 89)

Chapter 5: AMI BIOS

5-15

S.M.A.R.T. For Hard disk drives

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict

impending drive failures. Select Auto to allow the AMI BIOS to automatically de-

tect hard disk drive support. Select Disabled to prevent the AMI BIOS from using

the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T. to

support hard drive disk. The options are Disabled, Enabled, and Auto.

32Bit Data Transfer

Select Enable to enable the function of 32-bit IDE data transfer. The options are

Enabled and Disabled.

PCI/PnP Conﬁ guration

Clear NVRAM

This feature clears the NVRAM (Non-Volatile Random Access Memory) during

system boot. The options are No and Yes.

Plug & Play OS

Selecting Yes allows the OS to conﬁ gure Plug & Play devices. (This is not required

for system boot if Plug & Play is supported by your OS.) Select No to allow the AMI

BIOS to conﬁ gure all devices in the system.

PCI Latency Timer

This feature sets the latency Timer of each PCI device installed on a PCI bus. Select

64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96, 128,

160, 192, 224 and 248.

PCI IDE BusMaster

When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE drives.

The options are Disabled and Enabled.

Slot J2 PCIe Width

Select Auto for the BIOS to automatically detect the PCI-E width for slot J2.

Select Force x8/ x8 to set the PCI-E width to x8/ x8. The options are Auto and

Force x8/ x8.

Slot J2 PCI-E 2.0 x16/x8 Option ROM / Slot J1 PCI-E 2.0 x4 Option ROM

Select Enabled to enable PCI-E slots indicated above. It can also enable Option

ROMs speciﬁ ed to boot computer using a network interface from these slots. The

options are Enabled and Disabled.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 110 111

ChrisKed 02 Apr 2024 | 03:29:24

Hello, im noob :)

Supermicro X8DTU-6TF+ User Manual Page 89