Supermicro X8DTU-6TF+ User Manual download pdf (Page 9)

1-1

Chapter 1: Quick Installation Guide

To avoid damage, do not rub the CPU pins against the socket.

1-2 Installing the Passive CPU Heatsink

Chapter 1

Quick Installation Guide

1-1 Installing the CPU

A B

A. Press the socket clip down to unlock

it. Gently lift the socket clip to open the

load plate.

B. Align the CPU key with the socket

key.

D. Once the CPU is fully seated on

the socket, press the socket clip down

to lock it.

C. Align CPU Pin 1 against Socket Pin

1. Once they are aligned, lower the CPU

down to the socket.

A. Do not apply thermal grease on

the CPU or the heatsink; the required

amount has been applied.

B. Place the heatsink on top of the CPU,

making sure that the mounting holes are

aligned with those on the retention mech-

anism on the back side of the CPU.

C. Install two diagonal screws and

tighten them until just snug. (Do not fully

tighten the screws to avoid damaging

the CPU.)

D. Finish the installation by fully install-

ing all screws.

Screw#1

Screw#2

Screw#3

Screw#4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 110 111

ChrisKed 02 Apr 2024 | 03:29:24

Hello, im noob :)

Supermicro X8DTU-6TF+ User Manual Page 9