Supermicro X10DRG-Q User Manual download pdf (Page 99)

Chapter 4: AMI BIOS

4-27

Flow Control

Use this feature to set the ow control for Console Redirection to prevent data

loss caused by buffer overow. Send a "Stop" signal to stop sending data when

the receiving buffer is full. Send a "Start" signal to start data-sending when the

receiving buffer is empty. The options are None and Hardware RTS/CTS.

VT-UTF8 Combo Key Support

Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100

terminals. The options are Enabled and Disabled.

Recorder Mode

Select Enabled to capture the data displayed on a terminal and send it as text

messages to a remote server. The options are Disabled and Enabled.

Resolution 100x31

Select Enabled for extended-terminal resolution support. The options are Dis-

abled and Enabled.

Legacy OS Redirection Resolution

Use this feature to select the number of rows and columns used in Console

Redirection for legacy OS support. The options are 80x24 and 80x25.

Putty KeyPad

This feature selects Function Keys and KeyPad settings for Putty, which is a

terminal emulator designed for the Windows OS. The options are VT100, LINUX,

XTERMR6, SCO, ESCN, and VT400.

Redirection After BIOS POST

Use this feature to enable or disable legacy Console Redirection after BIOS

POST (Power-On Self-Test). When this feature is set to Bootloader, legacy

Console Redirection is disabled before booting the OS. When this feature is set

to Always Enable, legacy Console Redirection remains enabled upon OS boot.

The options are Always Enable and Bootloader.

EMS Console Redirection Settings

Out-of-Band Management Port

The feature selects a serial port in a client server to be used by the Windows

Emergency Management Services (EMS) to communicate with a remote host

server. The options are COM1 (Console Redirection) and COM2/SOL (Console

Redirection).

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 122 123

No comments

Supermicro X10DRG-Q User Manual Page 99