Supermicro X10DRG-Q User Manual download pdf (Page 85)

Chapter 4: AMI BIOS

4-13

Data Scrambling

Select Enabled to enable data scrambling to enhance system performance and

data integrity. The options are Auto, Disabled and Enabled.

DRAM RAPL Baseline

Use this feature to set the run-time power-limit baseline for DRAM modules. The

options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1.

Set Throttling Mode

Throttling improves reliability and reduces power consumption in the proces-

sor via automatic voltage control during processor idle states. The options are

Disabled and CLTT (Closed Loop Thermal Throttling).

Socket Interleave Below 4GB

Select Enabled for the memory above the 4G Address space to be split between

two sockets. The options are Enable and Disable.

A7 Mode

Select Enabled to support the A7 (Addressing) mode to improve memory per-

formance. The options are Enable and Disable.

DIMM Information

This item displays the status of a DIMM module specied by the user.

•P1-DIMMA1 - P1-DIMMD1

•P2-DIMME1 - P2-DIMMH1

Memory RAS (Reliability_Availability_Serviceability)

Conguration

Use this submenu to congure the following Memory RAS settings.

RAS Mode

When Disable is selected, RAS is not supported. When Mirror is selected, the

motherboard maintains two identical copies of all data in memory for data backup.

When Lockstep is selected, the motherboard uses two areas of memory to run

the same set of operations in parallel to boost performance. The options are

Disable, Mirror, and Lockstep Mode.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 122 123

No comments

Supermicro X10DRG-Q User Manual Page 85