Supermicro X10DRG-Q User Manual download pdf (Page 95)

Chapter 4: AMI BIOS

4-23

VGA Priority

Use this item to select the graphics device to be used as the primary video display

for system boot. The options are Onboard and Offboard.

Network Stack

Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-

ed Extensible Firmware Interface) for network stack support. The options are

Enabled and Disabled.



Super IO Conguration

Super IO Chip AST2400



Serial Port 1 Conguration/Serial Port 2 Conguration

Serial Port 1/Serial Port 2

Select Enabled to enable the onboard serial port specied by the user. The options

are Enabled and Disabled.

Device Settings

This item displays the base I/O port address and the Interrupt Request address of

a serial port specied by the user.

Change Port 1 Settings/Change Port 2 Settings

This feature species the base I/O port address and the Interrupt Request address

of Serial Port 1 or Serial Port 2. Select Auto for the BIOS to automatically assign

the base I/O and IRQ address to a serial port specied.

The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,

6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3,

4, 5, 6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).

The options for Serial Port 2 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,

6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3,

4, 5, 6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).

Serial Port 2 Attribute

Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redi-

rection. The options are COM and SOL.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 122 123

No comments

Supermicro X10DRG-Q User Manual Page 95