Supermicro X10DRG-Q User Manual download pdf (Page 120)

C-4

X10DRX Motherboard User’s Manual

7. Using a different system, extract the BIOS package into a bootable USB ash

drive.

8. When a DOS prompt appears, enter FLASH.BAT BIOSname.### at the

prompt.

Note: Do not interrupt this process until BIOS ashing is completed.

9. After seeing the message that BIOS update is completed, unplug the AC

power cable from the power supply to clear the CMOS, and then plug the AC

power cable in the power supply again to power on the system.

10. Press <Del> continuously to enter the BIOS Setup utility.

11. Press <F3> to load default settings.

12. After loading default settings, press <F4> to save the settings and exit the

BIOS Setup utility.

6. After the process of BIOS recovery is completed, press any key to reboot the

system.

1 2 ... 115 116 117 118 119 120 121 122 123

No comments

Supermicro X10DRG-Q User Manual Page 120