Supermicro 6016T-NTRF4+ User Manual download pdf (Page 86)

7-14

SUPERSERVER 6016T-URF4+/6016T-NTRF4+ User's Manual

Select UDMA2 to allow the BIOS to use Ultra DMA mode 2. It has a data transfer

rate of 33.3 MB/s.

Select UDMA3 to allow the BIOS to use Ultra DMA mode 3. It has a data transfer

rate of 44.4 MB/s.

Select UDMA4 to allow the BIOS to use Ultra DMA mode 4. It has a data transfer

rate of 66.6 MB/s.

S.M.A.R.T. For Hard disk drives

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict

impending drive failures. Select Auto to allow the AMI BIOS to automatically de-

tect hard disk drive support. Select Disabled to prevent the AMI BIOS from using

the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T. to

support hard drive disk. The options are Disabled, Enabled, and Auto.

32Bit Data Transfer

Select Enable to enable the function of 32-bit IDE data transfer. The options are

Enabled and Disabled.

XPCI/PnP Conﬁ guration

Clear NVRAM

This feature clears the NVRAM (Non-Volatile Random Access Memory) during

system boot. The options are No and Yes.

Plug & Play OS

Selecting Yes allows the OS to conﬁ gure Plug & Play devices. (This is not required

for system boot if Plug & Play is supported by your OS.) Select No to allow the AMI

BIOS to conﬁ gure all devices in the system.

PCI Latency Timer

This feature sets the latency Timer of each PCI device installed on a PCI bus. Select

64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96, 128,

160, 192, 224 and 248.

PCI Cache Line Size

This feature sets the cache line size of each PCI device installed on a PCI bus.

The options are 16, 32, 64, and 128 (MB).

PCI IDE BusMaster

When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE drives.

The options are Disabled and Enabled.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 105 106

No comments

Supermicro 6016T-NTRF4+ User Manual Page 86