Supermicro 6016T-NTRF4+ User Manual download pdf (Page 18)

2-4

SUPERSERVER 6016T-URF4+/6016T-NTRF4+ User's Manual

2-4 Installing the System into a Rack

This section provides information on installing the 6016T-URF4+/6016T-NTRF4+

into a rack unit with the rack rails provided. If the system has already been mounted

into a rack, you can skip ahead to Sections 2-5 and 2-6. There are a variety of rack

units on the market, which may mean the assembly procedure will differ slightly.

You should also refer to the installation instructions that came with the rack unit

you are using.

Identifying the Sections of the Rack Rails

You should have received two rack rail assemblies in the rack mounting kit. Each

assembly consists of two sections: an inner ﬁ xed chassis rail that secures directly

to the server chassis and an outer ﬁ xed rack rail that secures directly to the rack

itself (see Figure 2-1). Two pairs of short brackets to be used on the front side of

the outer rails are also included.

Installing the Inner Rails

Both the left and right side inner rails have been pre-attached to the chassis. Pro-

ceed to the next step.

Figure 2-1. Identifying the Sections of the Rack Rails

(left side rail shown)

Inner Rail Outer RailLocking Tab

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 105 106

No comments

Supermicro 6016T-NTRF4+ User Manual Page 18