Supermicro X9DRW-7TPF+ User Manual Page 87
- Page / 119
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 4: AMI BIOS
4-9
CPU C6 Report (Available when Power Technology is set to Custom)
Select Enabled to allow the BIOS to report the CPU C6 State (ACPI C3) to
the operating system. During the CPU C6 State, the power to all cache is
turned off. The options are Enabled and Disabled.
CPU C7 Report (Available when Power Technology is set to Custom)
Select Enabled to allow the BIOS to report the CPU C7 State (ACPI C3) to
the operating system. CPU C7 State is a processor-specic low C-State.
The options are Enabled and Disabled.
Package C-State limit (Available when Power Technology is set to
Custom)
This feature allows the user to set the limit on the C-State package register.
The options are C0, C2, C6, and No Limit.
Energy/Performance Bias
Use this feature to select an appropriate fan setting either to maximize system
performance (with maximum cooling/minimum power efciency) or to maximize
energy efciency (with maximum power saving/ minimum cooling). The fan
speeds are controlled by the rmware management via IPMI 2.0. The options are
Performance, Balanced Performance, Balanced Energy, and Energy Efcient.
Factory Long Duration Power Limit
This item displays the power limit (in watts) set by the manufacturer during which
long duration power is maintained.
Long Duration Power Limit
This feature is used to set the power limit (in watts) during which long duration
power is maintained. The default setting is 0.
Factory Long Duration Maintained
This item displays the period of time (in seconds) set by the manufacturer during
which long duration power is maintained.
Long Duration Maintained
This item is used to set the period of time (in seconds) during which long dura-
tion power is maintained. The default setting is 0.
Recommended Short Duration Power Limit
This item displays the short duration power settings (in watts) recommended by
the manufacturer.
- X9DRW-7TPF+ 1
- X9DRW-iTPF+ 1
- About This Motherboard 3
- Manual Organization 3
- Contacting Supermicro 5
- Table of Contents 6
- Chapter 3 Troubleshooting 8
- Chapter 4 BIOS 8
- Chapter 1 9
- Overview 9
- 10G MAC CODE 11
- 10G SAN MAC 11
- 1G MAC CODE 11
- •Six (6) SATA Ports from 15
- Management 17
- Dimensions 17
- 1-3 Special Features 20
- 1-4 PC Health Monitoring 20
- 1-5 ACPI Features 21
- 1-6 Power Supply 21
- 1-7 Super I/O 22
- Management Engine (ME) 23
- Controller 23
- •RMCP+ protocol supported 24
- Chapter 2 25
- Installation 25
- Product Disposal 27
- Precautions 28
- Unpacking 28
- WARNING! 29
- OPEN 1st 32
- CAUTION 35
- Removing Memory Modules 35
- Chapter 2: Installation 37
- •Phillips Screwdriver 40
- •Pan head screws (12 pieces) 40
- Installing the Motherboard 41
- USB 2, 4, 6 43
- Pin # Denition 43
- USB 3, 5 43
- Pin # Denition 43
- 1. GLAN1 45
- 2. GLAN2 45
- 3. LAN3 (10 GLAN Port/SFP1) 45
- 4. LAN4 (10 GLAN Port/SFP2) 45
- 5. IPMI_LAN 45
- 1. UID Switch 46
- 2. Rear UID LED (LE2) 46
- 3. Front UID LED 46
- Front Control Panel 47
- 2-7 Connecting Cables 52
- A. Internal Speaker (Buzzer) 54
- B. OH LED 54
- Standby Power Header 55
- A. T-SGPIO 1 57
- B. T-SGPIO 2 57
- C. DOM PWR 57
- 2-8 Jumper Settings 59
- A. Clear CMOS 60
- B. Watch Dog Enable 60
- A. VGA Enabled 61
- B. BMC Enabled 61
- A. JPME1 63
- B. JPME2 63
- 2-9 Onboard LED Indicators 64
- IPMI LAN 65
- Link LED Activity LED 65
- Activity LED (Right) 65
- SAS Activity LED Indicators 66
- SAS Fault LED Indicators 66
- Blinking 67
- BMC: Normal 67
- 2-10 SATA/SAS Connections 68
- A. SAS 0~3 69
- B. SAS 4~7 69
- Chapter 3 71
- Troubleshooting 71
- No Video 72
- System Boot Failure 72
- Memory Errors 73
- •System conguration 75
- Battery Removal 76
- Proper Battery Disposal 76
- Battery Installation 76
- Chapter 4 79
- 4-2 Main Setup 80
- Boot Feature 82
- •Type of CPU 83
- Chipset Conguration 88
- North Bridge 88
- QPI Conguration 89
- DIMM Conguration 90
- DIMM Information 90
- South Bridge Conguration 92
- SATA Conguration 93
- PCIe/PCI/PnP Conguration 94
- Super IO Conguration 96
- Serial Port 1 Conguration 96
- Serial Port 2 Conguration 96
- Console Redirection Settings 97
- •Data Bits 100
- •Parity 100
- •Stop Bits 100
- •ME BIOS Interface Version 101
- •ME Version 101
- •Add an Attempt 102
- NIC Conguration 103
- 4-4 Event Logs 104
- 4-5 IPMI 106
- BMC IPMI LAN Conguration 107
- •1st Boot Device 108
- •2nd Boot Device 108
- •3rd Boot Device 108
- •4th Boot Device 108
- •5th Boot Device 109
- •6th Boot Device 109
- •1st Device 109
- 4-7 Security 110
- 4-8 Save & Exit 111
- Appendix A 113
- BIOS Error Beep Codes 113
- Appendix B 115
Related products and manuals for Server/workstation motherboards Supermicro X9DRW-7TPF+
(99 pages)© 2020, manymanuals.com. All rights reserved. | 0.212 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals