Supermicro X9DRW-7TPF+ User Manual download pdf (Page 96)

4-18

X9DRW-7TPF+/iTPF+ Motherboard User’s Manual

Network Stack

Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unied

Extensible Firmware Interface) for network stack support. The options are Enabled

and Disabled.

Super IO Conguration

Super IO Chip: This item displays the Super IO chip used in the motherboard.

Serial Port 1 Conguration

Serial Port

Select Enabled to enable Serial Port 1 The options are Enabled and Disabled.

Device Settings

This item displays the base IO port address and the IRQ request address for Se-

rial Port 1.

Change Settings

This option species the base I/O port address and the Interrupt Request address of

Serial Port 1. Select Disabled to prevent the serial port from accessing any system

resources. The options are Auto, IO=3F8h; IRQ=4, IO=3F8h; IRQ=3, IO=2F8h;

IRQ=3, IO=3E8h; IRQ=5, IO=2E8h; IRQ=7, IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11,

12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;

IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;

Device Mode

Use this feature to select the desired mode for Serial Port 1. The options are Nor-

mal and High Speed.

Serial Port 2 Conguration

SOL (Serial-On-LAN) Serial Port

Select Enabled to enable Serial Port 2. The options are Enabled and Disabled.

Device Settings

This item displays the base IO port address and IRQ request address of Serial

Port 2.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 118 119

No comments

Supermicro X9DRW-7TPF+ User Manual Page 96