Supermicro X9DRW-7TPF+ User Manual Page 94

  • Download
  • Add to my manuals
  • Print
  • Page
    / 119
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 93
4-16
X9DRW-7TPF+/iTPF+ Motherboard User’s Manual
Port 0~5 Staggered Spin Up
Select Enabled to enable Staggered Spin-up support for a selected port to
prevent excessive power consumption caused by multiple HDDs spinning-up
simultaneously. The options are Enabled and Disabled.
RAID Mode
The following items are displayed when RAID Mode is selected:
SATA RAID Option ROM/UEFI Driver
Use this feature to enable the onboard SATA Option ROM or UEFI Driver.
The options are Enabled and Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The options
are Enabled and Disabled.
PCIe/PCI/PnP Conguration
Launch Storage OpROM Policy
Select Legacy only to use Legacy Storage Option ROM to boot the system. Select
UEFI only to use UEFI Storage Option ROM to boot the system. The options are
UEFI only and Legacy only.
Launch Video OpROM Policy
Select Legacy only to use Legacy Video Option ROM to boot the system. Select
UEFI only to use UEFI Video Option ROM to boot the system. The options are
UEFI only and Legacy only.
PCI Latency Timer
Use this feature to set the latency Timer of each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96,
128, 160, 192, 224 and 248.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
Page view 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 118 119

Comments to this Manuals

No comments