Supermicro X10SRi-F User Manual download pdf (Page 106)

4-36

X10SRi-F User’s Manual

When SEL is Full

This feature allows the user to determine what the BIOS should do when the sys-

tem event log is full. Select Erase Immediately to erase all events in the log when

the system event log is full. The options are Do Nothing and Erase Immediately.

Note: After making changes on a setting, be sure to reboot the system for

the changes to take effect.

BMC Network Conguration

The following items will be displayed:

IPMI LAN Selection

This item displays the IPMI LAN setting. The default setting is Failover.

IPMI Network Link Status

This item displays the IPMI Network Link status. The default setting is Shared LAN.

Update IPMI LAN Conguration

Select Yes for the BIOS to implement all IP/MAC address changes at the next

system boot. The options are No and Yes

Conguration Address Source

Use this item to select the source of the IP address for this computer. If Static is

selected, you will need to know the IP address of this computer and enter it to the

system manually in the eld. If DHCP is selected, the BIOS will search for a DHCP

(Dynamic Host Conguration Protocol) server in the network that is attached to

and request the next available IP address for this computer. The options are DHCP

and Static.

The following items are assigned IP addresses automatically if DHCP is selected,

or they can be congured manually if Static is selected.

Station IP Address

This item displays the Station IP address for this computer. This should be in decimal

and in dotted quad form (i.e., 192.168.10.253).

Subnet Mask

This item displays the sub-network that this computer belongs to. The value of each

three-digit number separated by dots should not exceed 255.

Station MAC Address

This item displays the Station MAC address for this computer. Mac addresses are

6 two-digit hexadecimal numbers.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 130 131

No comments

Supermicro X10SRi-F User Manual Page 106