Supermicro X10SRi-F User Manual download pdf (Page 81)

Chapter 4: AMI BIOS

4-11

P0 TotalTimeThreshold High

The hardware switching mechanism will disable the performance setting

when the total P0 time is greater than this threshold. Enter a numeric value.

 Socket RAPL (Running Average Power Limit) Cong

FAST_RAPL_NSTRIKE_PL2_DUTY_CYCLE

This feature displays the value of the item above within the range between 25

(10%) and 64 (25%).

Turbo Power Limit Lock

Select Enable to set the power use limit for the machine when it is running in

the turbo mode. The options are Enable and Disable.

Long Power Limit Override

Select Enable to support long-term power limit override. If this feature is disabled,

BIOS will set the default value. The options are Enable and Disable.

Long Duration Power Limit

This item displays the power limit set by the user during which long duration

power is maintained. The default setting is 0.

Package Clamping Limit1

Use this item to set the limit on power performance states for the run-time proces-

sor, with P0 being the state with the highest frequency (clock speed) and power

(consumption), and P1, a step lower in performance than P0, with its frequency

and voltage scaled back a notch. The options are Between P1/P0 and Below P1.

Short Duration Power Limit Enable

Select Enable to support Short Duration Power Limit (Power Limit 2). The options

are Enable and Disable.

Short Duration Power Limit

This item displays the time period during which short duration power is main-

tained. The default setting is 0.

Package Clamping Limit2

Use this item to set the limit on power performance states for the processor

operating in turbo mode, with P0 being the state with the highest frequency

(clock speed) and power (consumption), and P1, a step lower in performance

than P0, with its frequency and voltage scaled back a notch. The options are

Between P1/P0 and Below P1.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 130 131

No comments

Supermicro X10SRi-F User Manual Page 81