Supermicro X8DTH-IF User Manual download pdf (Page 84)

4-22

X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF User's Manual

Caution: Any cleared information is unrecoverable. Make absolutely sure

that you no longer need any data stored in the log before clearing the

BMC Event Log.

Set LAN Conﬁ guration

This feature allows the user to conﬁ gure the IPMI LAN settings.

Channel Number

This feature allows the user to enter a channel number to be used for the IPMI LAN

connection. This is initially set to [01].

Channel Number Status

This feature indicates the status of the channel number selected above.

IP Address Source

This feature allows the user to select the source of the IP address for the system. If

Static is selected, the user will need to manually enter the IP address for the system.

If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Conﬁ guration

Protocol) server in the network that the system is attached to, and request the next

available IP address. The options are DHCP and Static. If Static is selected, the

following items will be available for conﬁ guration.

IP Address

This feature allows the user to enter the IP address for your system. This should

be in decimal and in dotted quad form (i.e., 192.168.10.253). The value of each

three-digit number separated by dots should not exceed 255.

Subnet Mask

This item shows which subnet this system belongs to. The value of each three-digit

number separated by dots should not exceed 255.

Gateway Address

This is the IP address of the gateway in the network that the system is connected

to. This is usually a router.

Mac Address

The BIOS will automatically enter your system's Mac address; however it may be

over-ridden. Mac addresses are 6 two-digit hexadecimal numbers (Base 16, 0 ~ 9,

A, B, C, D, E, F) separated by dots. (i.e., 00.30.48.D0.D4.60).

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 96 97

No comments

Supermicro X8DTH-IF User Manual Page 84