Supermicro X8DTH-IF User Manual download pdf (Page 77)

Chapter 4: AMI BIOS

4-15

Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM

Select Enabled to enable the onboard LAN1 or LAN2 Option ROM. This is to boot

computer using a network interface. The options are Enabled and Disabled.

Load Onboard SAS Option ROM

Select Enabled to enable the onboard SAS Option ROM. This is to boot computer

using a network interface. The options are Enabled and Disabled.

Boot Graphics Adapter Priority

This feature allows the user to specify which graphics controller to be used as

the primary boot graphics controller. The options are Onboard VGA, PCI-E Slot

7, and Other.

Super IO Device Conﬁ guration

Serial Port1 Address/ Serial Port2 Address

This option speciﬁ es the base I/O port address and the Interrupt Request address

of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from

accessing any system resources. When this option is set to Disabled, the serial port

physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8

as its I/O port address and IRQ 4 for the interrupt address. The options for Serial

Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3. The options for Serial Port2

are Disabled, 2F8/IRQ3, 3E8/IRQ4, and 2E8/IRQ3.

Serial Port 2 Attribute

This feature allows the user to set COM 2 as a normal serial port or a virtual COM

port used for SOL (Serial Over LAN). The options are SOL, and COM.

Remote Access Conﬁ guration

Remote Access

This allows the user to enable the Remote Access feature. The options are Disabled

and Enabled.

If Remote Access is set to Enabled, the following items will display:

Serial Port Number

This feature allows the user decide which serial port to be used for Console Redi-

rection. The options are COM 1 and COM 2.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 96 97

No comments

Supermicro X8DTH-IF User Manual Page 77