Supermicro X8DTH-IF User Manual download pdf (Page 64)

4-2

X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF User's Manual

Starting the Setup Utility

Normally, the only visible Power-On Self-Test (POST) routine is the memory test.

As the memory is being tested, press the <Delete> key to enter the main menu of

the AMI BIOS Setup Utility. From the main menu, you can access the other setup

screens. An AMI BIOS identiﬁ cation string is displayed at the bottom left corner of

the screen below the copyright message.

Warning! Do not upgrade the BIOS unless your system has a BIOS-related

issue. Flashing the wrong BIOS can cause irreparable damage to the

system. In no event shall Supermicro be liable for direct, indirect, special,

incidental, or consequential damages arising from a BIOS update. If you

have to update the BIOS, do not shut down or reset the system while the

BIOS is updating. This is to avoid possible boot failure.

4-2 Main Setup

When you ﬁ rst enter the AMI BIOS Setup Utility, you will enter the Main setup screen.

You can always return to the Main setup screen by selecting the Main tab on the

top of the screen. The Main BIOS Setup screen is shown below.

System Overview: The following BIOS information will be displayed:

System Time/System Date

Use this option to change the system time and date. Highlight System Time or

System Date using the arrow keys. Key in new values through the keyboard and

press <Enter>. Press <Tab> to move between ﬁ elds. The date must be entered in

MM/DD/YY format. The time is entered in HH:MM:SS format. (Note: The time is in

the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 96 97

No comments

Supermicro X8DTH-IF User Manual Page 64