Supermicro X6DVL-EG2 User Manual download pdf (Page 63)

Chapter 4: AMI BIOS

4-11

Parallel Port Address

This option specifies the I/O address used by the parallel port. Select

Disabled to prevent the parallel port from accessing any system resources.

When the value of this option is set to Disabled, the printer port becomes

unavailable. Select 378 to allow the parallel port to use 378 as its I/O port

address. The majority of parallel ports on computer systems use IRQ7 and

I/O Port 378H as the standard setting. Select 278 to allow the parallel port to

use 278 as its I/O port address. Select 3BC to allow the parallel port to use

3BC as its I/O port address.

Parallel Port Mode

Specify the parallel port mode. The options are: Normal, Bi-directional,

EPP and ECP.

ECP Mode DMA Channel

This feature allows the AMI BIOS to select the ECP DMA Mode for the

parallel port. The Options are: DMA0, DMA1 and DMA3.

Parallel Port IRQ

Select the IRQ (interrupt request) for the parallel port. The options

are IRQ5 and IRQ7.

XAdvanced Chipset Settings

This item allows the user to configure the Advanced Chipset settings for

the system.

XNorthBridge Configuration

This feature allows the user to configure the settings for Intel E7320

Lindenhurst VS NorthBridge chipset.

Memory Remap Feature

Select Enabled to allow remapping of overlapped PCI memory above the

total physical memory. The options are Enabled and Disabled.

Memory Mirroring and Sparing

Select Enabled to enable Memory RAS (-Mirroring and Sparing) to allow

the system to create a mirror copy of data written to the memory for data

security. The options are Disabled and Enabled.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 105 106

No comments

Supermicro X6DVL-EG2 User Manual Page 63