Supermicro X6DVL-EG2 User Manual download pdf (Page 102)

C-18

X6DVL-EG2 User's Manual

C-2 Installing Intel's Hance Rapids Driver by

Adaptec and the Windows OS

a. Insert Supermicro's bootable CD that came with the package into the CD

Drive during the system reboot, and the screen:"Super Micro Driver Diskette

Maker" will appear.

b. From the list displayed on the screen, choose the item: "Intel Hance

Rapids Driver by 3rd Party (Adaptec)" and press <ENTER>.

c. From the next screen displayed, choose the OS driver you want to install

and press <Enter>.

d. Insert a formatted diskette into drive A: and press <Enter> as prompted.

e. Exit the program after the process is completed. Then, reboot the system.

f. Insert Microsoft Windows OS Setup CD in the CD Driver, and the system

will start to boot up from CD.

g. Press the <F6> key when the message-"Press F6 if you need to install a

third party SCSI or RAID driver" displays.

h. When the Windows OS Setup screen appears, press "S" to specify

additional device(s).

i. Insert the driver diskette-"Adaptec Embedded Serial ATA Raid Controller

Driver" into Drive A: and press the <Enter> key.

j. Choose the Adaptec Embedded Host Serial ATA Raid Controller from the

list indicated in the Windows OS Setup Screen, and press the <Enter> key.

k. Press the <Enter> key to continue the installation process. (If you need to

specify any additional devices to be installed, do it at this time.) Once all

devices are specified, press the <Enter> key to continue with the installa-

tion.

l. From the Windows OS Setup screen, press the <Enter> key. The OS

Setup will automatically load all device files, and, then, continue the Win-

dows OS installation.

m. After Windows OS Installation is completed, the system will automatically

reboot.

1 2 ... 97 98 99 100 101 102 103 104 105 106

No comments

Supermicro X6DVL-EG2 User Manual Page 102