Supermicro X10DRL-i User Manual download pdf (Page 96)

4-28

X10DRL-i Motherboard User’s Manual

Stop Bits

A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard

serial data communication. Select 2 Stop Bits if slower devices are used. The

options are 1 and 2.

Flow Control

Use this item to set the ow control for Console Redirection to prevent data

loss caused by buffer overow. Send a "Stop" signal to stop sending data when

the receiving buffer is full. Send a "Start" signal to start sending data when the

receiving buffer is empty. The options are None and Hardware RTS/CTS.

VT-UTF8 Combo Key Support

Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100

terminals. The options are Enabled and Disabled.

Recorder Mode

Select Enabled to capture the data displayed on a terminal and send it as text

messages to a remote server. The options are Disabled and Enabled.

Resolution 100x31

Select Enabled for extended-terminal resolution support. The options are Dis-

abled and Enabled.

Legacy OS Redirection Resolution

Use this item to select the number of rows and columns used in Console Redi-

rection for legacy OS support. The options are 80x24 and 80x25.

Putty KeyPad

This feature selects Function Keys and KeyPad settings for Putty, which is a

terminal emulator designed for the Windows OS. The options are VT100, LINUX,

XTERMR6, SCO, ESCN, and VT400.

Redirection After BIOS Post

Use this feature to enable or disable legacy Console Redirection after BIOS

POST. When the option-Bootloader is selected, legacy Console Redirection is

disabled before booting the OS. When the option- Always Enable is selected,

legacy Console Redirection remains enabled upon OS bootup. The options are

Always Enable and Bootloader.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 120 121

No comments

Supermicro X10DRL-i User Manual Page 96