Supermicro X10DRL-i User Manual download pdf (Page 29)

Chapter 2: Installation

2-7

Socket Keys

CPU Keys

Warning: You can only install the CPU

inside the socket in one direction. Make

sure that it is properly inserted into the

CPU socket before closing the load

plate. If it doesn't close properly, do not

force it as it may damage your CPU.

Instead, open the load plate again to

make sure that the CPU is aligned

properly.

4. Use your thumb and the index nger to loosen the lever and open the load

plate.

5. Using your thumb and index nger, hold the CPU on its edges. Align the CPU

keys, which are semi-circle cutouts, against the socket keys.

6. Once they are aligned, carefully lower the CPU straight down into the socket.

(Do not drop the CPU on the socket. Do not move the CPU horizontally or

vertically. Do not rub the CPU against the surface or against any pins of the

socket to avoid damaging the CPU or the socket.)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 120 121

No comments

Supermicro X10DRL-i User Manual Page 29