Supermicro X9SPV-M4-3QE User Manual download pdf (Page 98)

C-2

X9SPV-M4 Motherboard User’s Manual

Note: At this point, you may decide if you want to start with BIOS Recovery.

If you decide to proceed with BIOS Recovery, follow the procedures below.

5. When the screen as shown above displays, using the arrow key, select the

item- "Proceed with ash update" and press the <Enter> key. You will see the

progress of BIOS Recovery as shown in the screen below.

a USB CD/DVD ROM/RW device can be used for this purpose. However, a USB

Hard Disk drive cannot be used for BIOS recovery at this time.

To perform UEFI BIOS recovery using a USB-attached device, follow the instruc-

tions below.

1. Using a different machine, copy the "Super.ROM" binary image le into the

disc Root "\" Directory of a USB device or a writeable CD/DVD.

Note: If you cannot locate the "Super.ROM" le in your driver disk, visit

our website at www.supermicro.com to download the BIOS image into a

USB ash device and rename it to "Super ROM" for BIOS recovery use.

2. Insert the USB device that contains the new BIOS image ("Super.ROM") into

your USB drive and power on the system

3. While powering on the system, keep pressing <Ctrl> and <Home> simultane-

ously on your PS2 keyboard until your hear two short beeps. This may take

from a few seconds to one minute.

4. After locating the new BIOS binary image, the system will enter the BIOS

Recovery menu as shown below.

1 2 ... 93 94 95 96 97 98 99 100 101

No comments

Supermicro X9SPV-M4-3QE User Manual Page 98