Supermicro X9SPV-M4-3QE User Manual download pdf (Page 72)

Chapter 4: AMI BIOS

4-11

Internal HDMI/Display Port Codec (Available if Azalia set to Enabled)

Select Enabled to enable the internal HDMI/Display port codec for Azalia.

Wake on LAN

Use this feature to activate the Wake On LAN (WOL) feature. The options are

Enabled, and Disabled.

Note: The WOL feature cannot be disabled if ME is on at Sx state.

Deep Sx

Select Enabled to enable Deep Sleep State support. The options are Disabled,

Enabled in S5 and Enabled in S4-S5".

SLP_S4 Assertion Width

Use this feature to select a minimum assertion width of the SLP_S4 signal.

The options are Disabled, 1-2 Seconds, 2-3 Seconds, 3-4 Seconds, and 4-5

Seconds.



IDE/SATA Conguration

When this submenu is selected, the AMI BIOS automatically detects the presence

of the SATA Devices and displays the following items:

SATA Controllers

This item enables or disables the on board SATA controller. The options are En-

abled and Disabled:

SATA Mode Selection

This item selects the mode for the installed drives. The options are IDE Mode, AHCI

Mode and RAID Mode. The following are displayed depending on your selection:

IDE Mode

The following items are displayed when IDE Mode is selected:

IDE Legacy / Native Mode Selection

Use this feature to specify the operating mode of the integrated SATA

controllers. The options are Native and Legacy.

Serial ATA Port 0~5

This item displays the information detected on the installed SATA drives

on the particular SATA port.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 100 101

No comments

Supermicro X9SPV-M4-3QE User Manual Page 72