Supermicro X10SRH-CF User Manual download pdf (Page 89)

Chapter 4: AMI BIOS

4-15

Memory Conguration

Enforce POR

Select Enable to enforce POR restrictions on DDR4 frequency and voltage

programming. The options are Enabled and Disabled.

Memory Frequency

Use this feature to set the maximum memory frequency for onboard memory

modules. The options are Auto, 1333, 1400, 1600, 1800, 1867, 2000, 2133,

2200, 2400, 2600, 2667, and Reserved (Do not select Reserved).

ECC Support

Select Enable to allow additional output in the debug log to make machine pars-

ing easier. The options are Disable, Enable, and Auto.

Data Scrambling

Select Enabled to enable data scrambling to enhance system performance and

data integrity. The options are Auto, Disabled and Enabled.

Enable ADR

Select Enabled for ADR (Automatic Diagnostic Repository) support to enhance

memory performance. The options are Enabled and Disabled.

DRAM RAPL Baseline

Use this feature to set the run-time power-limit baseline for DRAM modules. The

options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1.

Set Throttling Mode

Throttling improves reliability and reduces power consumption in the proces-

sor via automatic voltage control during processor idle states. The options are

Disabled and CLTT (Closed Loop Thermal Throttling).

Socket Interleave Below 4GB

Select Enabled for the memory above the 4G Address space to be split between

two sockets. The options are Enable and Disable.

Isoc Mode

Select Enabled for Isochronous support to meet QoS (Quality of Service) require-

ments. This feature is especially important for Virtualization Technology. The

options are Enable and Disable.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 136 137

No comments

Supermicro X10SRH-CF User Manual Page 89