Supermicro X10SRH-CF User Manual download pdf (Page 96)

4-22

X10SRH-CF/CLN4F Motherboard User’s Manual

*If the item above "Congure sSATA as" is set to AHCI, the following items will

display:

Support Aggressive Link Power Management

When this item is set to Enabled, the SATA AHCI controller manages the power

usage of the SATA link. The controller will put the link to a low power state when

the I/O is inactive for an extended period of time, and the power state will return

to normal when the I/O becomes active. The options are Enabled and Disabled.

sSATA Port 0~ Port 3

This item displays the information detected on the installed on the sSATA port.

specied by the user.

•Model number of drive and capacity

•Software Preserve Support

sSATA Port 0~ Port 3

Select Enabled to enable an sSATA port specied by the user. The options are

Disabled and Enabled.

sSATA Port 0 ~ Port 3 Hot Plug

Select Enabled to enable hot-plugging support for a port specied by the user,

which will allow the user to replace a sSATA disk drive installed on this port

without shutting down the system. The options are Enabled and Disabled.

sSATA Port 0 ~ Port 3 Spin Up Device

On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRE-

SET initialization to the device. The options are Enabled and Disabled.

Port 0 ~ Port 3 sSATA Device Type

Use this item to specify if the sSATA port specied by the user should be con-

nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk

Drive and Solid State Drive.

*If the item above "Congure sSATA as" is set to IDE, the following items will

display:

sSATA Port 0~ Port 3

This item indicates that an sSATA port specied by the user is installed (pres-

ent) or not.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 136 137

No comments

Supermicro X10SRH-CF User Manual Page 96